PDF资料下载 |
暂无数据
|
---|
参数有误?
参数 | 参数值 | 操作 |
---|---|---|
商品目录 | 微控制器 | |
主芯片编码 | CXD5602 |
Description
Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as well as the more advanced NuttX based SDK.
The Spresense main board has the following features.
Sony’s CXD5602 Processor
8 MB Flash memory
PCB with small footprint
Dedicated camera connector
GNSS (GPS) antenna
Pins and LEDs
Multiple GPIO (UART, SPI, I2C, I2S)
2 ADC channels
Application LED x 4 (Green)
Power LED (Blue)
USB serial port
Name | Description |
---|---|
[PWR] Power LED |
Power LED. Emits blue light when power is supplied. |
[RST] Reset button |
Reset button. |
[LED0] to [LED3] |
Four user controllable green LEDs. |
[CN2] |
Micro USB Type-B connector. |
[CN4] |
B-2-B 100-pin connector to interface to additional boards. This connector is on the underside. |
[CN5] |
Camera connector. |
[BR] Boot recovery button |
This is used when restoring to the factory reset state. Only for recovery, normally not needed. |
1 x Spresense main board
ECCN | ERA99 |
HSCODE | 8543709990 |
USHSCODE | 8471500150 |
Description
Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as well as the more advanced NuttX based SDK.
The Spresense main board has the following features.
Sony’s CXD5602 Processor
8 MB Flash memory
PCB with small footprint
Dedicated camera connector
GNSS (GPS) antenna
Pins and LEDs
Multiple GPIO (UART, SPI, I2C, I2S)
2 ADC channels
Application LED x 4 (Green)
Power LED (Blue)
USB serial port
Name | Description |
---|---|
[PWR] Power LED |
Power LED. Emits blue light when power is supplied. |
[RST] Reset button |
Reset button. |
[LED0] to [LED3] |
Four user controllable green LEDs. |
[CN2] |
Micro USB Type-B connector. |
[CN4] |
B-2-B 100-pin connector to interface to additional boards. This connector is on the underside. |
[CN5] |
Camera connector. |
[BR] Boot recovery button |
This is used when restoring to the factory reset state. Only for recovery, normally not needed. |
1 x Spresense main board
ECCN | ERA99 |
HSCODE | 8543709990 |
USHSCODE | 8471500150 |
A : 请您放心,唯样商城所售卖的商品均为原装正品,我们是国内外知名品牌厂商的电子元件授权经销商,从源头保证品质。
A : 唯样自营精选品牌获得原厂授权代理资质,可以提供代理证书。部分商品数据来源于合作伙伴(如信和达、富昌电子、RS电子),我们对产品都进行了严格的资质审核,拥有原厂标签和相关票据以供查验。
A : 我们提供线下付款服务,方便公司的采购与财务对接,具体操作流程可在线咨询客服。
A : 下单前请仔细核对产品型号信息,如因自身原因造成的误订错订,唯样将不接受退换货要求。如果产品出现数量不对、型号不符、产品质量问题时,请务必保留原包装和标签,并在两周内联系我们申请退货。
¥2
若购买整盘会自带料盘无需额外购买料盘
|
|
单价:¥ 总价:¥ |
购买数量不足MPQ时,均为剪切带或散料出货。
最小包:1
制造商那里获得的最小包装数。由于唯样提供增值服务,因此最低起购数量可能会比制造商的最小包装数量少,如果要购买整盘,建议购买这个数量的整数倍
|
交期: 请咨询客服 |
起订量:1 | 倍数:1 |