| PDF资料下载 |
暂无数据
|
|---|
参数有误？
| 参数 | 参数值 | 操作 |
|---|---|---|
| 商品目录 | PixHawk |
Pixhawk ® 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and the PX4 team, optimized to run the full Dronecode stack and comes preinstalled with the latest PX4 firmware (v1.7).
It features the currently most advanced processor technology from ST Microelectronics ® , sensor technology from Bosch ® , InvenSense ® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The Pixwhawk 4’s microcontroller now has a 2 MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.
High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot,permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.
The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs,startups, and for academics (research, professors, students).
Features
- A new and small form factor
- More computing power and 2X the RAM than previous versions
- New sensors with higher temperature stability
- Integrated vibrations isolation
- Increased ease-of-use: pre-installed with most recent PX4 (v1.7)
- Additional ports for better integration and expansion
Technical details
| Dimensions | 84mm x44mm x12mm |
| Weight | G.W 15.8g |
| Battery | Exclude |
| Technical specifications | |
| Main FMU Processor | STM32F765 (32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM） |
| IO Processor | STM32F100(32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM) |
| On-board sensors | Accel/Gyro: ICM-20689, Accel/Gyro: BMI055, Mag: IST8310, Barometer: MS5611 |
| GPS | ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310 |
| Interfaces | |
| 8-16 PWM servo outputs (8 from IO, 8 from FMU) | |
| 3 dedicated PWM/Capture inputs on FMU | |
| Dedicated R/C input for CPPM | |
| Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input | |
| Dedicated S.Bus servo output | |
| 5 general purpose serial ports(2 with full flow control, 1 with separate 1.5A current limit) | |
| 3 I2C ports | |
| 1 internal high speed SPI sensor bus with 4 chip selects and 6 DRDYs | |
| 1 internal low noise SPI bus dedicated for Barometer with 2 chip selects, no DRDYs | |
| 1 internal SPI bus dedicated for FRAM, Supports dedicated SPI calibration EEPROM located on sensor module | |
| 1 external SPI buses | |
| Up to 2 CANBuses for dual CAN with serial ESC | |
| Analog inputs for voltage / current of 2 batteries | |
| 2 additional analog inputs | |
| Power module output | 4.9~5.5V |
| Max input voltage | 6V |
| Max current sensing | 120A |
| USB Power Input | 4.75~5.25V |
| Servo Rail Input | 0~36V |
| Operating temp | -40~85°C |
| Storage temp | -40~85°C |
| Certificates | CE, FCC，RoHS compliant (lead-free) |
Part List
| Pixhawk4 | 1 |
| Pixhawk4 GPS MODULE | 1 |
| Pixhawk 4 Power Management Board | 1 |
| I2C splitter Board | 1 |
| 6 to 6 pin cable (power) | 3 |
| 4 to 4 pin cable (CAN) | 2 |
| 6 to 4 pin cable (Data) | 1 |
| 10 to 10 pin cable (PWM) | 2 |
| 8 to 8 pin cable(AUX) | 1 |
| PPM/SBUS out cable | 1 |
| XSR receiver cable | 1 |
| DSMX receiver cable | 1 |
| SBUS receiver cable | 1 |
| USB cable | 1 |
| X'type folding pedestal mount | 1 |
| 70mm & 140mm carbon rod stand off | 2 |
| 6*3 2.54mm pitch Horizontal Pin | 1 |
| 8*3 2.54mm pitch Horizontal Pin | 1 |
| Foam Set | 1 |
| Pixhawk4 Quick Start Guide | 1 |
| GPS Quick Start Guide | 1 |
| Power Management Board Quick Start Guide | 1 |
| ECCN | 3A991.a |
| HSCODE | 9023009000 |
Pixhawk ® 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and the PX4 team, optimized to run the full Dronecode stack and comes preinstalled with the latest PX4 firmware (v1.7).
It features the currently most advanced processor technology from ST Microelectronics ® , sensor technology from Bosch ® , InvenSense ® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.
The Pixwhawk 4’s microcontroller now has a 2 MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.
High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot,permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.
The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs,startups, and for academics (research, professors, students).
Features
- A new and small form factor
- More computing power and 2X the RAM than previous versions
- New sensors with higher temperature stability
- Integrated vibrations isolation
- Increased ease-of-use: pre-installed with most recent PX4 (v1.7)
- Additional ports for better integration and expansion
Technical details
| Dimensions | 84mm x44mm x12mm |
| Weight | G.W 15.8g |
| Battery | Exclude |
| Technical specifications | |
| Main FMU Processor | STM32F765 (32 Bit Arm® Cortex®-M7, 216MHz, 2MB memory, 512KB RAM） |
| IO Processor | STM32F100(32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM) |
| On-board sensors | Accel/Gyro: ICM-20689, Accel/Gyro: BMI055, Mag: IST8310, Barometer: MS5611 |
| GPS | ublox Neo-M8N GPS/GLONASS receiver; integrated magnetometer IST8310 |
| Interfaces | |
| 8-16 PWM servo outputs (8 from IO, 8 from FMU) | |
| 3 dedicated PWM/Capture inputs on FMU | |
| Dedicated R/C input for CPPM | |
| Dedicated R/C input for Spektrum / DSM and S.Bus with analog / PWM RSSI input | |
| Dedicated S.Bus servo output | |
| 5 general purpose serial ports(2 with full flow control, 1 with separate 1.5A current limit) | |
| 3 I2C ports | |
| 1 internal high speed SPI sensor bus with 4 chip selects and 6 DRDYs | |
| 1 internal low noise SPI bus dedicated for Barometer with 2 chip selects, no DRDYs | |
| 1 internal SPI bus dedicated for FRAM, Supports dedicated SPI calibration EEPROM located on sensor module | |
| 1 external SPI buses | |
| Up to 2 CANBuses for dual CAN with serial ESC | |
| Analog inputs for voltage / current of 2 batteries | |
| 2 additional analog inputs | |
| Power module output | 4.9~5.5V |
| Max input voltage | 6V |
| Max current sensing | 120A |
| USB Power Input | 4.75~5.25V |
| Servo Rail Input | 0~36V |
| Operating temp | -40~85°C |
| Storage temp | -40~85°C |
| Certificates | CE, FCC，RoHS compliant (lead-free) |
Part List
| Pixhawk4 | 1 |
| Pixhawk4 GPS MODULE | 1 |
| Pixhawk 4 Power Management Board | 1 |
| I2C splitter Board | 1 |
| 6 to 6 pin cable (power) | 3 |
| 4 to 4 pin cable (CAN) | 2 |
| 6 to 4 pin cable (Data) | 1 |
| 10 to 10 pin cable (PWM) | 2 |
| 8 to 8 pin cable(AUX) | 1 |
| PPM/SBUS out cable | 1 |
| XSR receiver cable | 1 |
| DSMX receiver cable | 1 |
| SBUS receiver cable | 1 |
| USB cable | 1 |
| X'type folding pedestal mount | 1 |
| 70mm & 140mm carbon rod stand off | 2 |
| 6*3 2.54mm pitch Horizontal Pin | 1 |
| 8*3 2.54mm pitch Horizontal Pin | 1 |
| Foam Set | 1 |
| Pixhawk4 Quick Start Guide | 1 |
| GPS Quick Start Guide | 1 |
| Power Management Board Quick Start Guide | 1 |
| ECCN | 3A991.a |
| HSCODE | 9023009000 |
A : 请您放心,唯样商城所售卖的商品均为原装正品，我们是国内外知名品牌厂商的电子元件授权经销商，从源头保证品质。
A : 唯样自营精选品牌获得原厂授权代理资质，可以提供代理证书。部分商品数据来源于合作伙伴（如信和达、富昌电子、RS电子），我们对产品都进行了严格的资质审核，拥有原厂标签和相关票据以供查验。
A : 我们提供线下付款服务，方便公司的采购与财务对接，具体操作流程可在线咨询客服。
A : 下单前请仔细核对产品型号信息，如因自身原因造成的误订错订，唯样将不接受退换货要求。如果产品出现数量不对、型号不符、产品质量问题时，请务必保留原包装和标签，并在两周内联系我们申请退货。
| 价格梯度 | 单价(含税) |
|---|---|
| 1+ | ￥1719.0803 |
|
￥2
若购买整盘会自带料盘无需额外购买料盘
|
|
|
单价：￥ 总价：￥ |
购买数量不足MPQ时，均为剪切带或散料出货。
|
最小包：1
制造商那里获得的最小包装数。由于唯样提供增值服务，因此最低起购数量可能会比制造商的最小包装数量少，如果要购买整盘，建议购买这个数量的整数倍
|
交期： 请咨询客服 |
| 起订量：1 | 倍数：1 |
闽公网安备 35021102001214号 闽ICP备17005748号-1 增值电信业务经营许可证：闽B2-20200838
